A-4 NORDKAP 3L Pants

THE NORDKAP 3L JACKET are winter jacket for extreme motorcycle tours. All details and the technical equipment have been consistently developed for use at temperatures between +10 degrees and -30 degrees. The pants are 100% waterproof and available in 28 different sizes.

TECHNOLOGY
Material: Directly laminated, breathable and waterproof 3-layer membrane.
Heavy-duty 500D nylon fabric with PFC-free DWR treatment.

LEVEL OF CERTIFICATION
The pants meet the requirements of class AA of EN17092-3:2020.

PROTECTOR

Shoulders and Elbows: Flat and light SAS-TEC(R) SCL protectors. These protectors reach the highest level, level 2 of EN 1621-1:2012.

Back: Prepared for the SAS-TEC(r) SCL back protector level 2. This protector is available as an option.

INSULATION
Fixed lining with 240g/m² insulation and additional thermal inserts on the knees and in the seat area.

SUSTAINABILITY
PFC-free DWR finish (80/10)
Recycled poly bag packaging

WEATHER PROTECTION
10,000mm water resistance
10,000 g/m²/24h water vapor permeability

COMPOSITION
Outer fabric: 100% polyamide
Membrane: 100% polyurethane
Lining: 100% Polyester
Insulation: 100% polyester

Weight
2-3 kg (size dependant)

PROPERTIES
• Soft, padded and high collar
• Collar adjustable with a drawstring
• Fidlock (r) magnetic closure at collar.
• Waterproof labyrinth front closure to the left.
• Thermo overlap under the front closure
• Circumferential, adjustable belt
• A total of 6 outside pockets
• 3 Waterproof outer pockets with extra large labyrinth closure
• 100% waterproof document pouch in right breast pocket
• 2 side pockets with fleece
• 2 large inner pockets and an insulated mobile phone pocket
• Waterproof storm cuffs on the sleeves
• Glove cuffs fit comfortably under the sleeve cuffs
• Large silver reflective parts
• reflex with rainbow effect
• Width adjustment on the upper arm
• Velcro area for custom badges
• strong YKK Vislon(r)8 zippers
• Glove-friendly zipper pullers
• Long connection zipper to pants
• Hangers inside and outside
• Drawstring at hem
• Snow and wind skirt
• Seat bridge prevents the jacket from riding up
• Height adjustable Protectorbag

HOW IT WORKS: Always measure close to the body, because the measurements in the tables are pure body measurements. Please keep only underwear on and stand relaxed.

HEIGHT

CHEST
Run the tape measure horizontally under the armpits and measure the fullest part of the chest.

WAIST
Measure your waist or abdomen at the height of your navel.

HIP
Put the measuring tape around your hips and measure the circumference at the widest part of your buttocks.

32 SIZES FOR THE A-4 NORTH CAP 3L

The A-4 Nordkap 3L is very large! Therefore, you usually need a clothing size smaller than usual! If you are not sure about your measurements, please contact us by phone or e-mail.

HEAVY DIRT
In the case of particularly heavy soiling, brush off the dirt and rinse off with cold water.

CLOSURES
Grease zips and press studs with Edding 8150® silicone oil marker to ensure they run smoothly.

IMPREGNATION
Periodically impregnate dry clothing with Nikwax TX.Direct® Spray-on.

Remove all protectors.
Zippers, Velcro fasteners, close snap fasteners, preferably also the magnetic closure on the collar.

Wash with liquid mild detergent, e.g. Nikwax Tech Wash®, and rinse thoroughly. Do not use fabric softener. Spin briefly to 650-700 revs.

If possible, hang to dry in a ventilated place. Do not let dry on hot surfaces.

TECHNOLOGY
Material: Directly laminated, breathable and waterproof 3-layer membrane.
Heavy-duty 500D nylon fabric with PFC-free DWR treatment.

LEVEL OF CERTIFICATION
The pants meet the requirements of class AA of EN17092-3:2020.

PROTECTOR

Shoulders and Elbows: Flat and light SAS-TEC(R) SCL protectors. These protectors reach the highest level, level 2 of EN 1621-1:2012.

Back: Prepared for the SAS-TEC(r) SCL back protector level 2. This protector is available as an option.

INSULATION
Fixed lining with 240g/m² insulation and additional thermal inserts on the knees and in the seat area.

SUSTAINABILITY
PFC-free DWR finish (80/10)
Recycled poly bag packaging

WEATHER PROTECTION
10,000mm water resistance
10,000 g/m²/24h water vapor permeability

COMPOSITION
Outer fabric: 100% polyamide
Membrane: 100% polyurethane
Lining: 100% Polyester
Insulation: 100% polyester

Weight
2-3 kg (size dependant)

HOW IT WORKS: Always measure close to the body, because the measurements in the tables are pure body measurements. Please keep only underwear on and stand relaxed.

HEIGHT

CHEST
Run the tape measure horizontally under the armpits and measure the fullest part of the chest.

WAIST
Measure your waist or abdomen at the height of your navel.

HIP
Put the measuring tape around your hips and measure the circumference at the widest part of your buttocks.

32 SIZES FOR THE A-4 NORTH CAP 3L

The A-4 Nordkap 3L is very large! Therefore, you usually need a clothing size smaller than usual! If you are not sure about your measurements, please contact us by phone or e-mail.

HEAVY DIRT
In the case of particularly heavy soiling, brush off the dirt and rinse off with cold water.

CLOSURES
Grease zips and press studs with Edding 8150® silicone oil marker to ensure they run smoothly.

IMPREGNATION
Periodically impregnate dry clothing with Nikwax TX.Direct® Spray-on.

Remove all protectors.
Zippers, Velcro fasteners, close snap fasteners, preferably also the magnetic closure on the collar.

Wash with liquid mild detergent, e.g. Nikwax Tech Wash®, and rinse thoroughly. Do not use fabric softener. Spin briefly to 650-700 revs.

If possible, hang to dry in a ventilated place. Do not let dry on hot surfaces.

DESCRIPTION
CARE INSTRUCTIONS

TECHNOLOGY
Material: Directly laminated, breathable and waterproof 3-layer membrane.
Heavy-duty 500D nylon fabric with PFC-free DWR treatment.

LEVEL OF CERTIFICATION
The pants meet the requirements of class AA of EN17092-3:2020.

PROTECTOR

Shoulders and Elbows: Flat and light SAS-TEC(R) SCL protectors. These protectors reach the highest level, level 2 of EN 1621-1:2012.

Back: Prepared for the SAS-TEC(r) SCL back protector level 2. This protector is available as an option.

INSULATION
Fixed lining with 240g/m² insulation and additional thermal inserts on the knees and in the seat area.

SUSTAINABILITY
PFC-free DWR finish (80/10)
Recycled poly bag packaging

WEATHER PROTECTION
10,000mm water resistance
10,000 g/m²/24h water vapor permeability

COMPOSITION
Outer fabric: 100% polyamide
Membrane: 100% polyurethane
Lining: 100% Polyester
Insulation: 100% polyester

Weight
2-3 kg (size dependant)

HEAVY DIRT
In the case of particularly heavy soiling, brush off the dirt and rinse off with cold water.

CLOSURES
Grease zips and press studs with Edding 8150® silicone oil marker to ensure they run smoothly.

IMPREGNATION
Periodically impregnate dry clothing with Nikwax TX.Direct® Spray-on.

Remove all protectors.
Zippers, Velcro fasteners, close snap fasteners, preferably also the magnetic closure on the collar.

Wash with liquid mild detergent, e.g. Nikwax Tech Wash®, and rinse thoroughly. Do not use fabric softener. Spin briefly to 650-700 revs.

If possible, hang to dry in a ventilated place. Do not let dry on hot surfaces.

32 SIZES FOR THE A-4 NORTH CAP 3L

The A-4 Nordkap 3L is very large! Therefore, you usually need a clothing size smaller than usual! If you are not sure about your measurements, please contact us by phone or e-mail.