A-4 NORDKAP 3L - FEATURES

A-4 NORDKAP 3L - INNOVATIONS 

  • 3-layer construction with 500D nylon outer material. Here we made sure that the material is not too stiff and “boardy”.
  • A new high-performance PU membrane laminate ensures the breathability and waterproofness (10,000 mm water resistance 10,000 gr/m²/24h water vapor permeability) of the 3-layer material.
  • In addition to the 240gr/m² cotton insulation, additional insulation was installed on the buttocks and knees.
  • Certification level Class AA according to EN17092-3:2020 has been achieved.
  • The impregnation is now PFC-free for environmental reasons!
  • The outer packaging is 100% recycled
  • More and bigger pockets. The additional, non-waterproof chest pocket for quick access is equipped with a waterproof inner pouch.
  • The jacket pockets have a larger labyrinth overlap and are waterproof. The left chest pocket is sloped for better ergonomics.
  • The pants now have two large cargo pockets with zippers.
  • The silver reflective parts are made of 3M Scotchlite and are combined with iridescent rainbow reflex.
  • Large inner mesh pockets with fleece cell phone pocket.
  • A longer connection zipper between jacket and trousers, staggered according to size, increases ease of use, especially for larger sizes.
  • Large sections with stretch material in the kidney area replace the accordion stretch section.
  • New, lighter and more flexible Sas-tec SCL-1 Level 2 protectors on shoulders, elbows and knees. The elbows are 2-way adjustable and the knees are 3-way adjustable. The hip protectors are now standard. The optional back protector is the lightweight and flexible Sas-tec SCL-19 back protector with level 2.

PROVEN DETAILS

  • It is again very important to us to work with high-quality suppliers such as Duraflex®, Fidlock®, 3M Scotchlite™, SAS-TEC® and YKK®. So we can be sure that our thermal suit will work even under extreme conditions.
  • The front closure to the left like on women's jackets, this effectively prevents the closure from remaining securely closed due to the increased, one-sided wind pressure from the sidecar.
  • The most important focuses were safety, wearing comfort and practical details.
  • The collar is wide, comfortable and 3-dimensional and closes with the patented Fidlock® magnetic closure.
  • A fit tailored to the riding position ensures a perfect fit on the touring motorcycle. With a total of 28 sizes, you can also find exotic items.
  • Only YKK Vislon® zippers are used; they run absolutely smoothly and don't get caught anywhere. The zippers are all sewn in for easy maintenance and could be replaced without any problems using even the simplest means. It can be operated using long zipper pulls, even with gloves.
  • The glove cuffs are easily pulled into the completely openable cuffs. The waterproof inner cuff with thumb loop ensures a waterproof and windproof connection.
  • To avoid cold spots, the jacket is long and the trousers are cut very high.
  • A seat stay, drawstring in the hem and the inner snow and wind skirt create a perfect connection between jacket and trousers.
  • The insulation of 240gr/m² has proven itself in numerous tests and reliably insulates at temperatures down to minus 30 degrees.
  • Removable wide suspenders

A-4 NORDKAP 3L - INNOVATIONS

  • 3-layer construction with 500D nylon outer material. Here we made sure that the material is not too stiff and “boardy”.
  • A new high-performance PU membrane laminate ensures the breathability and waterproofness (10,000 mm water resistance 10,000 gr/m²/24h water vapor permeability) of the 3-layer material.
  • In addition to the 240gr/m² cotton insulation, additional insulation was installed on the buttocks and knees.
  • Certification level Class AA according to EN17092-3:2020 has been achieved.
  • The impregnation is now PFC-free for environmental reasons!
  • The outer packaging is 100% recycled
  • More and bigger pockets. The additional, non-waterproof chest pocket for quick access is equipped with a waterproof inner pouch.
  • The jacket pockets have a larger labyrinth overlap and are waterproof. The left chest pocket is sloped for better ergonomics.
  • The pants now have two large cargo pockets with zippers.
  • The silver reflective parts are made of 3M Scotchlite and are combined with iridescent rainbow reflex.
  • Large inner mesh pockets with fleece cell phone pocket.
  • A longer connection zipper between jacket and trousers, staggered according to size, increases ease of use, especially for larger sizes.
  • Large sections with stretch material in the kidney area replace the accordion stretch section.
  • New, lighter and more flexible Sas-tec SCL-1 Level 2 protectors on shoulders, elbows and knees. The elbows are 2-way adjustable and the knees are 3-way adjustable. The hip protectors are now standard. The optional back protector is the lightweight and flexible Sas-tec SCL-19 back protector with level 2.

PROVEN DETAILS

  • It is again very important to us to work with high-quality suppliers such as Duraflex®, Fidlock®, 3M Scotchlite™, SAS-TEC® and YKK®. So we can be sure that our thermal suit will work even under extreme conditions.

  • The front closure to the left like on women's jackets, this effectively prevents the closure from remaining securely closed due to the increased, one-sided wind pressure from the sidecar.
  • The most important focuses were safety, wearing comfort and practical details.
  • The collar is wide, comfortable and 3-dimensional and closes with the patented Fidlock® magnetic closure.
  • A fit tailored to the riding position ensures a perfect fit on the touring motorcycle. With a total of 28 sizes, you can also find exotic items.
  • Only YKK Vislon® zippers are used; they run absolutely smoothly and don't get caught anywhere. The zippers are all sewn in for easy maintenance and could be replaced without any problems using even the simplest means. It can be operated using long zipper pulls, even with gloves.
  • The glove cuffs are easily pulled into the completely openable cuffs. The waterproof inner cuff with thumb loop ensures a waterproof and windproof connection.
  • To avoid cold spots, the jacket is long and the trousers are cut very high.
  • A seat stay, drawstring in the hem and the inner snow and wind skirt create a perfect connection between jacket and trousers.
  • The insulation of 240gr/m² has proven itself in numerous tests and reliably insulates at temperatures down to minus 30 degrees.
  • Removable wide suspenders

A-4 NORDKAP 3L
THE COLLAR

The soft, padded collar has a comfortable, three-dimensional design and closes with the patented Fidlock® magnetic fastener. This eliminates annoying fumbling, especially when wearing gloves. Fine adjustment is made via a drawstring on the back of the jacket.

A-4 NORDKAP 3L
THE FRONT FASTENING
 
The waterproof labyrinth front fastener opens to the left, as with ladies' jackets. This ensures that the fastener remains securely closed even with increased wind pressure on one side. A thermal overlap on the inside supports this effect.

A-4 NORDKAP 3L
THE CHEST POCKET
 
There are three waterproof outer pockets on the front of the A-4 Nordkap 3L jacket, with the two lower ones having side fleece pockets. The additional right chest pocket is not waterproof, but is equipped with a waterproof inner pouch for quick access.

A-4 NORDKAP 3L
THE REFLECTORS
 
The silver reflective sections are made of 3M Scotchlite. They are combined with "iridescent" reflective sections (rainbow effect).
A-4 NORDKAP 3L
THE VELCRO SURFACE
 
The velcro surface on the upper arm is for patches or name labels. These must first be sewn onto hook and loop and can then be attached to the soft hook and loop surface of the jacket.
A-4 NORDKAP 3L
THE PROTECTORS
 
There are 2 pockets for the protectors on the elbows and 3 on the knees, so that different positions are possible.

A-4 NORDKAP 3L
THE BRACES
 
The braces are detachable and adjustable. The trousers have a high waistband and a circumferential, adjustable belt.
A-4 NORDKAP 3L
THE CONNECTION

The connection between jacket and trousers is made possible by a long connecting zip.

A-4 NORDKAP 3L
THE SLEEVE CUFF
 
The glove should be worn inside the sleeve to prevent rainwater from running in.
A-4 NORDKAP 3L
THE BALACLAVA

To protect the helmet-neck-collar bridge from moisture and snow, we recommend combining the A-4 jacket with the SCOTT SNOW BLOCKER balaclava. The waterproofness can be increased by pulling the balaclava collar over the jacket collar.

A-4 NORDKAP 3L
THE COLLAR

The soft, padded collar has a comfortable, three-dimensional design and closes with the patented Fidlock® magnetic fastener. This eliminates annoying fumbling, especially when wearing gloves. Fine adjustment is made via a drawstring on the back of the jacket.

A-4 NORDKAP 3L
THE FRONT FASTENING
 
The waterproof labyrinth front fastener opens to the left, as with ladies' jackets. This ensures that the fastener remains securely closed even with increased wind pressure on one side. A thermal overlap on the inside supports this effect.

A-4 NORDKAP 3L
THE CHEST POCKET
 
There are three waterproof outer pockets on the front of the A-4 Nordkap 3L jacket, with the two lower ones having side fleece pockets. The additional right chest pocket is not waterproof, but is equipped with a waterproof inner pouch for quick access.
A-4 NORDKAP 3L
THE REFLECTORS
 
The silver reflective sections are made of 3M Scotchlite. They are combined with "iridescent" reflective sections (rainbow effect).
A-4 NORDKAP 3L
THE VELCRO SURFACE
 
The velcro surface on the upper arm is for patches or name labels. These must first be sewn onto hook and loop and can then be attached to the soft hook and loop surface of the jacket.
A-4 NORDKAP 3L
THE PROTECTORS
 
There are 2 pockets for the protectors on the elbows and 3 on the knees, so that different positions are possible.

A-4 NORDKAP 3L
THE BRACES
 
The braces are detachable and adjustable. The trousers have a high waistband and a circumferential, adjustable belt.
A-4 NORDKAP 3L
THE CONNECTION

The connection between jacket and trousers is made possible by a long connecting zip.

A-4 NORDKAP 3L
THE SLEEVE CUFF
 
The glove should be worn inside the sleeve to prevent rainwater from running in.
A-4 NORDKAP 3L
THE BALACLAVA

To protect the helmet-neck-collar bridge from moisture and snow, we recommend combining the A-4 jacket with the SCOTT SNOW BLOCKER balaclava. The waterproofness can be increased by pulling the balaclava collar over the jacket collar.

A-4 NORDKAP 3L
THE COLLAR

The soft, padded collar has a comfortable, three-dimensional design and closes with the patented Fidlock® magnetic fastener. This eliminates annoying fumbling, especially when wearing gloves. Fine adjustment is made via a drawstring on the back of the jacket.
A-4 NORDKAP 3L
THE FRONT
 
The waterproof labyrinth front fastener opens to the left, as with ladies' jackets. This ensures that the fastener remains securely closed even with increased wind pressure on one side. A thermal overlap on the inside supports this effect.
A-4 NORDKAP 3L
THE CHEST POCKET
 
There are three waterproof outer pockets on the front of the A-4 Nordkap 3L jacket, with the two lower ones having side fleece pockets. The additional right chest pocket is not waterproof, but is equipped with a waterproof inner pouch for quick access.
A-4 NORDKAP 3L
THE REFLECTORS
 
The silver reflective sections are made of 3M Scotchlite. They are combined with "iridescent" reflective sections (rainbow effect).
A-4 NORDKAP 3L
THE VELCRO SURFACE
 
The velcro surface on the upper arm is for patches or name labels. These must first be sewn onto hook and loop and can then be attached to the soft hook and loop surface of the jacket.
A-4 NORDKAP 3L
THE PROTECTORS
 
There are 2 pockets for the protectors on the elbows and 3 on the knees, so that different positions are possible.
A-4 NORDKAP 3L
THE BRACES
 
The braces are detachable and adjustable. The trousers have a high waistband and a circumferential, adjustable belt.
A-4 NORDKAP 3L
THE CONNECTION

The connection between jacket and trousers is made possible by a long connecting zip.

A-4 NORDKAP 3L
THE SLEEVE CUFF
 
The glove should be worn inside the sleeve to prevent rainwater from running in.
A-4 NORDKAP 3L
THE BALACLAVA

To protect the helmet-neck-collar bridge from moisture and snow, we recommend combining the A-4 jacket with the SCOTT SNOW BLOCKER balaclava. The waterproofness can be increased by pulling the balaclava collar over the jacket collar.