A-4 NORDKAP 3L Jacket

THE NORDKAP 3L JACKET are winter jacket for extreme motorcycle tours. All details and the technical equipment have been consistently developed for use at temperatures between +10 degrees and -30 degrees. The pants are 100% waterproof and available in 28 different sizes.

TECHNOLOGY
Material: Directly laminated, breathable and waterproof 3-layer membrane.
Heavy-duty 500D nylon fabric with PFC-free DWR treatment.

LEVEL OF CERTIFICATION
The jacket meet the requirements of class AA of EN17092-3:2020.

PROTECTOR

Shoulders and Elbows: Flat and light SAS-TEC(R) SCL protectors. These protectors reach the highest level, level 2 of EN 1621-1:2012.

Back: Prepared for the SAS-TEC(r) SCL back protector level 2. This protector is available as an option.

INSULATION
Fixed lining with 240g/m² insulation and additional thermal inserts on the knees and in the seat area.

SUSTAINABILITY
PFC-free DWR finish (80/10)
Recycled poly bag packaging

WEATHER PROTECTION
10,000mm water resistance
10,000 g/m²/24h water vapor permeability

COMPOSITION
Outer fabric: 100% polyamide
Membrane: 100% polyurethane
Lining: 100% Polyester
Insulation: 100% polyester

Weight
2-3 kg (size dependant)

PROPERTIES
• Soft, padded and high collar
• Collar adjustable with a drawstring
• Fidlock (r) magnetic closure at collar.
• Waterproof labyrinth front closure to the left.
• Thermo overlap under the front closure
• Circumferential, adjustable belt
• A total of 6 outside pockets
• 3 Waterproof outer pockets with extra large labyrinth closure
• 100% waterproof document pouch in right breast pocket
• 2 side pockets with fleece
• 2 large inner pockets and an insulated mobile phone pocket
• Waterproof storm cuffs on the sleeves
• Glove cuffs fit comfortably under the sleeve cuffs
• Large silver reflective parts
• reflex with rainbow effect
• Width adjustment on the upper arm
• Velcro area for custom badges
• strong YKK Vislon(r)8 zippers
• Glove-friendly zipper pullers
• Long connection zipper to pants
• Hangers inside and outside
• Drawstring at hem
• Snow and wind skirt
• Seat bridge prevents the jacket from riding up
• Height adjustable Protectorbag

HOW TO MEASURE: Always measure close to the body, because the measurements in the tables are pure body measurements. Please keep only underwear on and stand relaxed.

A HEIGHT
"From top to toe"

B CHEST
Run the tape measure horizontally under the armpits and measure the fullest part of the chest.

C WAIST
Measure your waist or abdomen at the height of your navel.

D HIP
Put the measuring tape around your hips and measure the circumference at the widest part of your buttocks.

32 SIZES FOR THE A-4 NORDKAP 3L

The A-4 NORDKAP 3L is very large! Therefore, you usually need a clothing size smaller than usual! If you are not sure about your measurements, please contact us by phone or e-mail.

HEAVY DIRT
In the case of particularly heavy soiling, brush off the dirt and rinse off with cold water.

CLOSURES
Grease zips and press studs with Edding 8150® silicone oil marker to ensure they run smoothly.

IMPREGNATION
Periodically impregnate dry clothing with Nikwax TX.Direct® Spray-on.

Remove all protectors.
Zippers, Velcro fasteners, close snap fasteners, preferably also the magnetic closure on the collar.

Wash with liquid mild detergent, e.g. Nikwax Tech Wash®, and rinse thoroughly. Do not use fabric softener. Spin briefly to 650-700 revs.

If possible, hang to dry in a ventilated place. Do not let dry on hot surfaces.

TECHNOLOGY
Material: Directly laminated, breathable and waterproof 3-layer membrane.
Heavy-duty 500D nylon fabric with PFC-free DWR treatment.

LEVEL OF CERTIFICATION
The jacket meet the requirements of class AA of EN17092-3:2020.

PROTECTOR

Shoulders and Elbows: Flat and light SAS-TEC(R) SCL protectors. These protectors reach the highest level, level 2 of EN 1621-1:2012.

Back: Prepared for the SAS-TEC(r) SCL back protector level 2. This protector is available as an option.

INSULATION
Fixed lining with 240g/m² insulation and additional thermal inserts on the knees and in the seat area.

SUSTAINABILITY
PFC-free DWR finish (80/10)
Recycled poly bag packaging

WEATHER PROTECTION
10,000mm water resistance
10,000 g/m²/24h water vapor permeability

COMPOSITION
Outer fabric: 100% polyamide
Membrane: 100% polyurethane
Lining: 100% Polyester
Insulation: 100% polyester

Weight
2-3 kg (size dependant)

HOW TO MEASURE: Always measure close to the body, because the measurements in the tables are pure body measurements. Please keep only underwear on and stand relaxed.

A HEIGHT
"From top to toe"

B CHEST
Run the tape measure horizontally under the armpits and measure the fullest part of the chest.

C WAIST
Measure your waist or abdomen at the height of your navel.

D HIP
Put the measuring tape around your hips and measure the circumference at the widest part of your buttocks.

32 SIZES FOR THE A-4 NORTH CAP 3L

The A-4 Nordkap 3L is very large! Therefore, you usually need a clothing size smaller than usual! If you are not sure about your measurements, please contact us by phone or e-mail.

HEAVY DIRT
In the case of particularly heavy soiling, brush off the dirt and rinse off with cold water.

CLOSURES
Grease zips and press studs with Edding 8150® silicone oil marker to ensure they run smoothly.

IMPREGNATION
Periodically impregnate dry clothing with Nikwax TX.Direct® Spray-on.

Remove all protectors. Zippers, Velcro fasteners, close snap fasteners, preferably also the magnetic closure on the collar.

Wash with liquid mild detergent, e.g. Nikwax Tech Wash®, and rinse thoroughly. Do not use fabric softener. Spin briefly to 650-700 revs.

If possible, hang to dry in a ventilated place. Do not let dry on hot surfaces.

DESCRIPTION
MAINTENANCE

TECHNOLOGY
Material: Directly laminated, breathable and waterproof 3-layer membrane.
Heavy-duty 500D nylon fabric with PFC-free DWR treatment.

LEVEL OF CERTIFICATION
The jacket meet the requirements of class AA of EN17092-3:2020.

PROTECTOR

Shoulders and Elbows: Flat and light SAS-TEC(R) SCL protectors. These protectors reach the highest level, level 2 of EN 1621-1:2012.

Back: Prepared for the SAS-TEC(r) SCL back protector level 2. This protector is available as an option.

INSULATION
Fixed lining with 240g/m² insulation and additional thermal inserts on the knees and in the seat area.

SUSTAINABILITY
PFC-free DWR finish (80/10)
Recycled poly bag packaging

WEATHER PROTECTION
10,000mm water resistance
10,000 g/m²/24h water vapor permeability

COMPOSITION
Outer fabric: 100% polyamide
Membrane: 100% polyurethane
Lining: 100% Polyester
Insulation: 100% polyester

Weight
2-3 kg (size dependant)

HEAVY DIRT
In the case of particularly heavy soiling, brush off the dirt and rinse off with cold water.

CLOSURES
Grease zips and press studs with Edding 8150® silicone oil marker to ensure they run smoothly.

IMPREGNATION
Periodically impregnate dry clothing with Nikwax TX.Direct® Spray-on.

Remove all protectors. Zippers, Velcro fasteners, close snap fasteners, preferably also the magnetic closure on the collar.

Wash with liquid mild detergent, e.g. Nikwax Tech Wash®, and rinse thoroughly. Do not use fabric softener. Spin briefly to 650-700 revs.

If possible, hang to dry in a ventilated place. Do not let dry on hot surfaces.

Description

Item weight:	2,70 kg

32 SIZES FOR THE A-4 NORDKAP 3L The A-4 NORDKAP 3L is very large! Therefore, you usually need a clothing size smaller than usual! If you are not sure about your measurements, please contact us by phone or e-mail.

HOW TO MEASURE: Always measure close to the body, because the measurements in the tables are pure body measurements. Please keep only underwear on and stand relaxed.

A HEIGHT
"From top to toe"

B CHEST
Run the tape measure horizontally under the armpits and measure the fullest part of the chest.

C WAIST
Measure your waist or abdomen at the height of your navel.

D HIP
Put the measuring tape around your hips and measure the circumference at the widest part of your buttocks.